Brake Failure Indicator For Four Wheelers | Electrical Project
Brake Failure Indicator For Four Wheelers
Abstract
The objective of this project is to identify the Brake
Failure in the Four Wheeler vehicle. All most all the vehicles are facing out the problem so
called as brake failure, how to rectify? What to do to prevent this brake
failure which results in more number of accidents. To overcome this problem, we
find a solution called brake failure indicator in order to rectify the problem.
In this project we are using 89C51 or PIC16F877
Microcontroller to check the Brake Condition. Normally the Braking system in the four wheelers is air
pressure type or oil type. Here the project is designed for both pressure
types. The Braking System is connected to pressure tank.
The pressure sensor senses the pressure in the tank, then
the signal from the sensor is amplified to some voltage level it given to the
ADC. The ADC convert the incoming analog voltage signal to Digital signal then
it send to Microcontroller.
If the pressure level is low the Microcontroller activates
alarm through the driver circuit. So the alarm gives audible signal to the
Rider. Here the Microcontroller display the corresponding pressure range in the
LCD display
