Automobile Surveillance | Automobile Project
Automobile Surveillance
Abstract
This is the innovative project for the purpose of the
surveillance of the automobiles using the communication technologies. The major
objective of our project is to minimize the automobile theft and to provide an
additional security to the automobiles
PROJECT DESCRIPTION
Nowadays communication is flourishing everywhere, it just
spread all over the world. We could able to communicate with every nook and
corner of the world. The micro controllers and computers are helping to develop
the communication field in a very quick manner.
The Radio Frequency (RF) modules consist of transmitters and
receivers. RF is playing a very important role in communication systems. One of
the features of the RF modules is its easy interface facility with the Computer
and Micro Controller. Hence, we in our project aim to innovate an idea to use
the RF modules for the surveillance of the automobiles.
Our project consists of the following devices: (a) RF
transmission Module and (b) RF reception module. The RF Transmission Module
consists of 1) RF transmitter, 2) Micro controller (89C51), 3) Address setting
keypad and 4) auto and manual switches and indicators. The RF Reception Module
consists of 1) RF receiver module, 2) MAX 232 and 3) PC (personal computer).
RF TRANSMISSION MODULE
The transmitter module is fitted in the automobiles in order
to transmit the address of the automobile. This section consists of the micro
controller. The micro controller is programmed to generate the RF signal
according to the input set through the address setting keypad.
The address
setting keypad is to set the address of the automobiles into the micro
controller. The micro controller is programmed to send the RF signal to the
Transmitter. The transmitter receives the signal from the micro controller and
transmits the RF signal though antenna.
The additional feature provided in this project is the
selector switch. The RF transmission can be switched either automatically or by
manually.
RF RECEPTION MODULE
The RF reception module is kept at the check station or
check post, in order to receive the RF signal transmitted by the Transmission
module. This module is interfaced with the PC through the MAX 232 port. The RF
receiver receives the RF signal transmitted by the RF transmission module. It
just receives the RF signal and passes it to the PC. The MAX232 port is used to
interface the receiver and the PC