Automatic Fuel Tank Filling System | Automobile Project
Automatic Fuel Tank Filling System
Abstract
The ultimate aim of Automatic Fuel Tank Filling System
project is to fill the vehicle fuel tank based on the input given through the
keypad arrangement accurately
PROJECT DESCRIPTION
In this project we innovated a new idea that the vehicle
fuel tank can be filled up with accurate quantity of fuel based on the value
given through the keypad arrangement. Here we are using the micro controller to
perform the overall controlling functions.
Here the fuel tank is placed at a constant height and the
pressure level of the tank is maintained at a particular level so that the fuel
coming out through the tube could be the same quantity. Constant volume tube is
used here to take the fuel out of the source tank and it is controlled based on
the time factor.
First we should set the timing value for each and every unit
of fuel by measuring the quantity of fuel flowing from the outlet. Then this
can be implemented with the same tank pressure and outlet valve size.
The amount of Fuel filled is displayed through the LCD
display and the process status is indicated through the indicator. Here when we
enter the quantity of fuel which is to be filled in the unit of liters the
micro controller unit identifies this data and it actuates the valve control
circuitry to open and close the valve for corresponding time limit so as to
fill the vehicle fuel tank.
