Automatic Energy Management Systems | Electrical Project
Automatic Energy Management Systems
Abstract
This system is used to control the power and save the energy
for production.
Description
This Monitoring and Control system having four two different
modules,
1) Controller
2) PC
Controller
Which is divided into two different modules,
a) Serial Communication
b) ADC for four machine power reader
c) Relay/machine control
PC
This is divided into three modules,
a) RS232 communication,
b) Control and communication,
c) Display module
We are using opamp to control the power consumed by the
machine to digital data’s. micro controller to pc via RS232 to converted by
max232 and relay driver to control all the relays for load when micro
controller requested given the power low.
Criteria
The powers limited to 4 machines are 60Watts / month.
Calculation is done for every 10 days if it exceeds 20 Watts. Any one of the
machines should get tripped in order to equalize the power consumption. The
remaining machine will run till the power gets equalized for 10 days. This
process continues for every 10 days.
Input
The power consumed is sent from micro controller to pc
Output
Which machine should get tripped to micro controller through
RS232 communication?
